FRENES

Wheels from Omoda 5 on Renault VelSatis: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 60.1 mm centre bore: wheels from Omoda 5 bolt on and centre on Renault VelSatis without rings. You still need to check the offset and tyres, detailed below.

Omoda 5from 2024Renault VelSatis2001–2009
PCD5x1085x108
Centre bore60.1 mm60.1 mm
ThreadM12x1.5M14x1.50
Original wheels 6.5Jx17 ET33
7Jx18 ET33		 ≈7Jx17 ET50

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Omoda 5 is compared with the one from Renault VelSatis of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx17 ET33 · 215/60R17 — Check on the car

    Compared with the original ≈7Jx17 ET50 on Renault VelSatis: shock absorber side −23.4 mm, wheel arch side +10.7 mm, tyre diameter +1.5 %. Comparison for guidance only (estimated width). Check in detail

  • 7Jx18 ET33 · 215/55R18

    Renault VelSatis has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault VelSatis (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Renault VelSatis on Omoda 5?