Omoda 5 PCD

from 2024

VERIFIED

Centre bore60.1 mm

Offset (ET)ET33

Fixing typeM12x1.5

Original tyres215/55R18, 215/60R17

koleso (omoda/5) et tirewheelguide (chery/omoda-5) : 5x108 / 60.1 / M12x1.5. La fiche tirewheelguide omoda/5 2025 indique 65.1 et M14x1.5 pour l'essence, considérée erronée.

Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Omoda 5

A Omoda 5 (from 2024) uses a 5x108 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x108 required. See all vehicles with 5x108.
Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
Offset: the original is ET33. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 215/55R18, 215/60R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
1.6 TGDi / E5 EV	5x108	60.1 mm	7Jx18	ET33	215/55R18
1.6 TGDi (certains marchés)	5x108	60.1 mm	6.5Jx17	ET33	215/60R17

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Omoda 5 without rings. Offset, width, diameter and caliper clearance still need checking.

Jaecoo 7 from 2024 Nissan NV250 2019–2022 Mercedes Citan from 2012 Renault Kangoo 2 5 trou 2008–2013 Renault Clio Sport 2006–2013 Renault Megane 2.0 dCi 2005–2008 Renault Megane 2 RS 2004–2009 Renault Espace IV 2002–2015 Renault Avantime 2001–2003 Renault VelSatis 2001–2009 Renault Laguna 2 2000–2007 Renault Megane Scenic RX-4 2000–2003 Renault Kangoo 1998–2007 Renault Espace 3 1997–2002

Will wheels from another vehicle fit your 5?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Omoda 5?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Jaecoo 7 from 2024 Wheels from Renault Clio Sport 2006–2013 Wheels from Renault Megane 2 RS 2004–2009 Wheels from Renault VelSatis 2001–2009

Same PCD, different centre bore

These vehicles also use 5x108 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 60.1 mm, and will not fit if it is smaller.

Smart #5 ⌀63.4 Zeekr 9X ⌀63.4 Lynk&Co 02 ⌀63.4 Polestar Polestar 4 ⌀63.4 Volvo EC40 ⌀63.4 Volvo EX40 axe arrière ⌀63.4 Volvo EX40 axe avant ⌀63.4 Zeekr 7X ⌀63.4

Frequently asked questions

What is the PCD of a Omoda 5?

A Omoda 5 (from 2024) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Omoda 5 need a hub centric ring?

The centre bore (hub diameter) of a Omoda 5 is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Omoda 5?

The recorded original offset is ET33 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Omoda 5?

With the same PCD (5x108) and the same centre bore (60.1 mm), these include: Jaecoo 7, Nissan NV250, Mercedes Citan, Renault Kangoo 2 5 trou. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.