Yes, the hub is identical
Same 5x105 PCD and same 56.6 mm centre bore: wheels from Opel Ampera-e bolt on and centre on Chevrolet Trax without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Opel Ampera-e is compared with the one from Chevrolet Trax of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
6.5Jx16 ET41 · 205/55R16 — Fits like the original
Compared with the original ≈6.5Jx16 ET39 on Chevrolet Trax: shock absorber side +2 mm, wheel arch side −2 mm, tyre diameter −8.9 % : fit it with the original tyre size of Chevrolet Trax (205/70R16), not that of Opel Ampera-e.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Chevrolet Trax (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Chevrolet Trax on Opel Ampera-e?