FRENES

Wheels from Opel Corsa E on Fiat Punto Evo: compatible?

Yes, with hub centric rings

Same 4x100 PCD, but the centre bore of the wheels from Opel Corsa E (65.1 mm) is larger than the hub of Fiat Punto Evo (56.6 mm): you need 4 hub centric rings 65.1 → 56.6.

Rings 65.1 → 56.6

Opel Corsa E2014–2019Fiat Punto Evo2009–2012
PCD4x100 / 4x1084x100
Centre bore65.1 mm56.6 mm
ThreadM12x1.50M12x1.50
Original wheels 6Jx15 ET39
≈6Jx16 ET38		 6Jx15 ET43

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Opel Corsa E is compared with the one from Fiat Punto Evo of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx15 ET39 · 185/65R15 — Fits like the original

    Compared with the original 6Jx15 ET43 on Fiat Punto Evo: shock absorber side −4 mm, wheel arch side +4 mm, tyre diameter +2.1 % : fit it with the original tyre size of Fiat Punto Evo (175/65R15), not that of Opel Corsa E. Check in detail

  • ≈6Jx16 ET38 · 195/55R16

    Fiat Punto Evo has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Fiat Punto Evo (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Fiat Punto Evo on Opel Corsa E?