FRENES

Opel Corsa E PCD

2014–2019
VERIFIED
⌀56.6
PCD4x100 or 4x108
Centre bore56.6 or 65.1 mm
Offset (ET)ET38 to ET39
Fixing typeM12x1.50
Tightening torque110 Nm
Original tyres185/65R15, 195/55R16
⚠ This model comes with 4x100 or 4x108 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 56.6 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Corsa E

A Opel Corsa E (2014–2019) uses a 4x100 or 4x108 PCD and a centre bore of 56.6 or 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 or 4x108 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 56.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.6 mm.
  • Offset: the original is ET38 to ET39. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 110 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/65R15, 195/55R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 56.6 mm 6Jx15 ET39 185/65R15
Version 2 4x108 65.1 mm — ET38 195/55R16

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.6 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Corsa E without rings. Offset, width, diameter and caliper clearance still need checking.

Opel Karl from 2015 Opel Adam Rocks from 2014 Opel Adam from 2012 Opel Corsa D 4 trou 2006–2014 Opel Astra H 4 trou 2004–2009 Opel Tigra Twin Top from 2004 Opel Meriva 4 trou 2003–2010 Opel Combo 4 trou 2001–2010 Opel Corsa C 4 trou 2000–2006 Opel Vectra B 4 trou 1995–1998 Opel Combo 1994–2001 Opel Tigra 1994–2000 Opel Corsa B 1993–2000 Opel Astra F 1991–1997 Opel Vectra A 4 trou 1988–1995 Opel Kadett E 1984–1993

Will wheels from another vehicle fit your Corsa E?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Opel Corsa E?

A Opel Corsa E (2014–2019) can have a 4x100 or 4x108 PCD depending on the version: check on an original wheel.

Does a Opel Corsa E need a hub centric ring?

The centre bore (hub diameter) of a Opel Corsa E is 56.6 or 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Corsa E?

The recorded original offset is ET38 to ET39 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Opel Corsa E?

The specified tightening torque is 110 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Opel Corsa E?

With the same PCD (4x100) and the same centre bore (56.6 mm), these include: Opel Karl, Opel Adam Rocks, Opel Adam, Opel Corsa D 4 trou. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.