FRENES

Wheels from Opel Crossland X on Peugeot 208 II: compatible?

Yes, the hub is identical

Same 4x108 PCD and same 65.1 mm centre bore: wheels from Opel Crossland X bolt on and centre on Peugeot 208 II without rings. You still need to check the offset and tyres, detailed below.

Opel Crossland Xfrom 2017Peugeot 208 IIfrom 2019
PCD4x1084x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 6.5Jx15 ET20 6Jx15 ET32
6.5Jx16 ET32
7Jx17 ET32

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Opel Crossland X is compared with the one from Peugeot 208 II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx15 ET20 · 195/65R15 — Risk of rubbing

    Compared with the original 6Jx15 ET32 on Peugeot 208 II: shock absorber side −5.6 mm, wheel arch side +18.4 mm, tyre diameter +2.1 % : fit it with the original tyre size of Peugeot 208 II (185/65R15), not that of Opel Crossland X. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Peugeot 208 II (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Peugeot 208 II on Opel Crossland X?