FRENES

Wheels from Peugeot 208 II on Opel Crossland X: compatible?

Yes, the hub is identical

Same 4x108 PCD and same 65.1 mm centre bore: wheels from Peugeot 208 II bolt on and centre on Opel Crossland X without rings. You still need to check the offset and tyres, detailed below.

Peugeot 208 IIfrom 2019Opel Crossland Xfrom 2017
PCD4x1084x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 6Jx15 ET32
6.5Jx16 ET32
7Jx17 ET32		 6.5Jx15 ET20

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Peugeot 208 II is compared with the one from Opel Crossland X of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6Jx15 ET32 · 185/65R15 — Check on the car

    Compared with the original 6.5Jx15 ET20 on Opel Crossland X: shock absorber side +5.6 mm, wheel arch side −18.4 mm, tyre diameter −2 % : fit it with the original tyre size of Opel Crossland X (195/65R15), not that of Peugeot 208 II. Check in detail

  • 6.5Jx16 ET32 · 195/55R16

    Opel Crossland X has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx17 ET32 · 205/45R17

    Opel Crossland X has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Opel Crossland X (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Opel Crossland X on Peugeot 208 II?