FRENES

Wheels from Peugeot 2008 II on Alfa Romeo Junior: compatible?

Yes, the hub is identical

Same 4x108 PCD and same 65.1 mm centre bore: wheels from Peugeot 2008 II bolt on and centre on Alfa Romeo Junior without rings. You still need to check the offset and tyres, detailed below.

Peugeot 2008 IIfrom 2019Alfa Romeo Juniorfrom 2024
PCD4x1084x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 6.5Jx16 ET32
6.5Jx17 ET32
7Jx18 ET35		 ≈7Jx17 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Peugeot 2008 II is compared with the one from Alfa Romeo Junior of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx17 ET32 · 215/60R17 — Fits like the original

    Compared with the original ≈7Jx17 ET35 on Alfa Romeo Junior: shock absorber side −9.3 mm, wheel arch side −3.3 mm, tyre diameter +0 %. Comparison for guidance only (estimated width). Check in detail

  • 6.5Jx16 ET32 · 215/65R16

    Alfa Romeo Junior has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx18 ET35 · 215/55R18

    Alfa Romeo Junior has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Alfa Romeo Junior (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Alfa Romeo Junior on Peugeot 2008 II?