FRENES

Wheels from Peugeot 308 III on Toyota ProAce City: compatible?

Yes, the hub is identical

Same 5x108 PCD and same 65.1 mm centre bore: wheels from Peugeot 308 III bolt on and centre on Toyota ProAce City without rings. You still need to check the offset and tyres, detailed below.

Peugeot 308 IIIfrom 2021Toyota ProAce Cityfrom 2020
PCD5x1085x108
Centre bore65.1 mm65.1 mm
ThreadM12x1.25M12x1.25
Original wheels 7Jx16 ET44
7Jx16 ET44
7.5Jx17 ET44
7.5Jx18 ET44
7.5Jx18 ET44		 6.5Jx15 ET42
6.5Jx16 ET47
6.5Jx16 ET47

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Peugeot 308 III is compared with the one from Toyota ProAce City of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx16 ET44 · 205/55R16 — Check on the car

    Compared with the original 6.5Jx16 ET47 on Toyota ProAce City: shock absorber side +3.3 mm, wheel arch side +9.3 mm, tyre diameter −7.9 % : fit it with the original tyre size of Toyota ProAce City (215/65R16), not that of Peugeot 308 III. Check in detail

  • 7Jx16 ET44 · 205/60R16 — Check on the car

    Compared with the original 6.5Jx16 ET47 on Toyota ProAce City: shock absorber side +3.3 mm, wheel arch side +9.3 mm, tyre diameter −4.9 % : fit it with the original tyre size of Toyota ProAce City (215/65R16), not that of Peugeot 308 III. Check in detail

  • 7.5Jx17 ET44 · 225/45R17

    Toyota ProAce City has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7.5Jx18 ET44 · 215/45R18

    Toyota ProAce City has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7.5Jx18 ET44 · 225/40R18

    Toyota ProAce City has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota ProAce City (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Toyota ProAce City on Peugeot 308 III?