FRENES

Toyota ProAce City PCD

from 2020
VERIFIED
⌀65.1
PCD5x108
Centre bore65.1 mm
Offset (ET)ET42 to ET47
Fixing typeM12x1.25
Tightening torque100 Nm
Original tyres195/65R15, 215/65R16, 205/60R16
Base Citroën Berlingo III, vis de roue
Wheel spacers 5x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota ProAce City

A Toyota ProAce City (from 2020) uses a 5x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x108 required. See all vehicles with 5x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET42 to ET47. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 100 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 215/65R16, 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x108 65.1 mm 6.5Jx15 ET42 195/65R15
Version 2 5x108 65.1 mm 6.5Jx16 ET47 215/65R16
Version 3 5x108 65.1 mm 6.5Jx16 ET47 205/60R16

Vehicles with the same PCD and centre bore

Same 5x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota ProAce City without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota ProAce 2013–2016 DS DS 7 from 2023 Peugeot 408 from 2022 Citroen C5 X from 2021 DS DS 4 II from 2021 Opel Astra L from 2021 Peugeot 308 III from 2021 DS DS 9 2020–2026 Opel Zafira Life from 2019 Citroen Berlingo III from 2018 Opel Combo E from 2018 Peugeot 508 II from 2018 Peugeot Rifter from 2018 Citroen C5 Aircross from 2017 DS DS 7 Crossback 2017–2023 Opel Grandland X from 2017

Will wheels from another vehicle fit your ProAce City?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota ProAce City?

A Toyota ProAce City (from 2020) has a PCD of 5x108: 5 studs or bolts spaced around a circle 108 mm in diameter.

Does a Toyota ProAce City need a hub centric ring?

The centre bore (hub diameter) of a Toyota ProAce City is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota ProAce City?

The recorded original offset is ET42 to ET47 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota ProAce City?

The specified tightening torque is 100 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota ProAce City?

With the same PCD (5x108) and the same centre bore (65.1 mm), these include: Toyota ProAce, DS DS 7, Peugeot 408, Citroen C5 X. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.