Yes, the hub is identical
Same 4x98 PCD and same 58.1 mm centre bore: wheels from RAM RAM 700 Pickup bolt on and centre on Lancia Y without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from RAM RAM 700 Pickup is compared with the one from Lancia Y of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈5.5Jx14 ET40 · 175/70R14 — Check on the car
Compared with the original ≈5Jx14 ET41 on Lancia Y: shock absorber side +5.3 mm, wheel arch side +7.3 mm, tyre diameter +5.3 % : fit it with the original tyre size of Lancia Y (165/65R14), not that of RAM RAM 700 Pickup.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Lancia Y (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Lancia Y on RAM RAM 700 Pickup?