Same 6x114.3 PCD and same 66.1 mm centre bore: wheels from Renault Alaskan bolt on and centre on Nissan Navara NP300 without rings. You still need to check the offset and tyres, detailed below.
| Renault Alaskanfrom 2016 | Nissan Navara NP3002016–2022 | |
|---|---|---|
| PCD | 6x114.3 | 6x114.3 |
| Centre bore | 66.1 mm | 66.1 mm |
| Thread | Ecrous - 12x1.25 | M12x1.25 |
| Original wheels | 7Jx16 ET45 | 5.5Jx15 ET50 6Jx16 ET55 7Jx16 ET45 7Jx18 ET45 |
≈: width estimated from the original tyre size.
Each original wheel from Renault Alaskan is compared with the one from Nissan Navara NP300 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 7Jx16 ET45 on Nissan Navara NP300: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Navara NP300 (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Nissan Navara NP300 on Renault Alaskan?