FRENES

Nissan Navara NP300 PCD

2016–2022
VERIFIED
⌀66.1
PCD6x114.3
Centre bore66.1 mm
Offset (ET)ET45 to ET55
Fixing typeM12x1.25
Tightening torque133 Nm
Original tyres195R15, 205R16, 255/70R16, 255/60R18
D23 ; couple 133 N·m selon koleso. Production européenne (Barcelone) arrêtée fin 2021.
Wheel spacers 6x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan Navara NP300

A Nissan Navara NP300 (2016–2022) uses a 6x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x114.3 required. See all vehicles with 6x114.3.
  • Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
  • Offset: the original is ET45 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 133 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195R15, 205R16, 255/70R16, 255/60R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Nissan Navara

Previous generation: Nissan Navara (1998–2004) — same 6x114.3 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Navara 1998–2004 · 6x114.3 Navara NP300 2016–2022

All recorded versions (4)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
2.3 dCi 160 (King Cab) 6x114.3 66.1 mm 5.5Jx15 ET50 195R15
2.3 dCi 160 6x114.3 66.1 mm 6Jx16 ET55 205R16
2.3 dCi 160 6x114.3 66.1 mm 7Jx16 ET45 255/70R16
2.3 dCi 190 (Tekna / N-Guard) 6x114.3 66.1 mm 7Jx18 ET45 255/60R18

Will wheels from another vehicle fit your Navara NP300?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 6x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 66.1 mm, and will not fit if it is smaller.

Dodge Durango ⌀71.6 Dodge Dakota ⌀71.6

Frequently asked questions

What is the PCD of a Nissan Navara NP300?

A Nissan Navara NP300 (2016–2022) has a PCD of 6x114.3: 6 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Nissan Navara NP300 need a hub centric ring?

The centre bore (hub diameter) of a Nissan Navara NP300 is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan Navara NP300?

The recorded original offset is ET45 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan Navara NP300?

The specified tightening torque is 133 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan Navara NP300?

With the same PCD (6x114.3) and the same centre bore (66.1 mm), these include: Nissan Xterra, Nissan Navara, Nissan Pathfinder, Mercedes X-Classe. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.