FRENES

Wheels from Renault Captur II on Renault Kadjar: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Renault Captur II bolt on and centre on Renault Kadjar without rings. You still need to check the offset and tyres, detailed below.

Renault Captur IIfrom 2019Renault Kadjarfrom 2015
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadM12x1.5M12x1.50
Original wheels 6.5Jx16 ET32
7Jx17 ET35
7Jx18 ET35		 6.5Jx16 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Renault Captur II is compared with the one from Renault Kadjar of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx16 ET32 · 215/65R16 — Check on the car

    Compared with the original 6.5Jx16 ET40 on Renault Kadjar: shock absorber side −8 mm, wheel arch side +8 mm, tyre diameter +0 %. Check in detail

  • 7Jx17 ET35 · 215/60R17

    Renault Kadjar has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx18 ET35 · 215/55R18

    Renault Kadjar has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Kadjar (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Renault Kadjar on Renault Captur II?