FRENES

Renault Captur II PCD

from 2019
VERIFIED
⌀66.1
PCD5x114.3
Centre bore66.1 mm
Offset (ET)ET32 to ET35
Fixing typeM12x1.5
Tightening torque105 Nm
Original tyres215/65R16, 215/60R17, 215/55R18
Hub centric rings 66.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Renault Captur II

A Renault Captur II (from 2019) uses a 5x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
  • Offset: the original is ET32 to ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 105 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/65R16, 215/60R17, 215/55R18. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 66.1 mm 6.5Jx16 ET32 215/65R16
Version 2 5x114.3 66.1 mm 7Jx17 ET35 215/60R17
Version 3 5x114.3 66.1 mm 7Jx18 ET35 215/55R18

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Renault Captur II without rings. Offset, width, diameter and caliper clearance still need checking.

Renault 4 E-Tech from 2025 Renault 5 E-Tech from 2024 Renault Grand Kangoo from 2024 Renault Rafale from 2024 Renault Symbioz from 2024 Renault Scenic E-Tech from 2023 Renault Austral from 2022 Renault Megane E-Tech from 2022 Renault Arkana from 2020 Renault Megane 4 2016–2023 Renault Scenic 2016–2023 Renault Espace 2015–2023 Renault Kadjar from 2015 Renault Talisman from 2015 Renault Captur I 2013–2020 Renault Fluence from 2010

Will wheels from another vehicle fit your Captur II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Renault Captur II?

A Renault Captur II (from 2019) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Renault Captur II need a hub centric ring?

The centre bore (hub diameter) of a Renault Captur II is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Renault Captur II?

The recorded original offset is ET32 to ET35 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Renault Captur II?

The specified tightening torque is 105 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Renault Captur II?

With the same PCD (5x114.3) and the same centre bore (66.1 mm), these include: Renault 4 E-Tech, Renault 5 E-Tech, Renault Grand Kangoo, Renault Rafale. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.