FRENES

Wheels from Renault Scenic E-Tech on Nissan Juke II: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 66.1 mm centre bore: wheels from Renault Scenic E-Tech bolt on and centre on Nissan Juke II without rings. You still need to check the offset and tyres, detailed below.

Renault Scenic E-Techfrom 2023Nissan Juke IIfrom 2019
PCD5x114.35x114.3
Centre bore66.1 mm66.1 mm
ThreadM12x1.50M12x1.5
Original wheels 7.5Jx19 ET46 6.5Jx16 ET35
7Jx17 ET35
7.5Jx19 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Renault Scenic E-Tech is compared with the one from Nissan Juke II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7.5Jx19 ET46 · 205/55R19 — Risk of rubbing

    Compared with the original 7.5Jx19 ET35 on Nissan Juke II: shock absorber side +11 mm, wheel arch side −11 mm, tyre diameter +3.4 % : fit it with the original tyre size of Nissan Juke II (225/45R19), not that of Renault Scenic E-Tech. Check in detail

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Nissan Juke II (M12x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Nissan Juke II on Renault Scenic E-Tech?