FRENES

Wheels from Renault Twingo E-Tech on Mitsubishi Colt: compatible?

No, the centre bore is too small

Same 4x100 PCD, but the centre bore of the wheels from Renault Twingo E-Tech (60.1 mm) is smaller than the hub of Mitsubishi Colt (67.1 mm): they will not fit without being re-bored by a professional.

Renault Twingo E-Techfrom 2026Mitsubishi Colt1988–1992
PCD4x1004x114.3 / 4x100
Centre bore60.1 mm67.1 mm
ThreadM12x1.50Ecrous - 12x1.50
Original wheels ≈6Jx16 ET35 ≈5.5Jx13 ET46
≈5.5Jx14 ET46
≈6Jx14 ET46
≈6Jx15 ET46
≈6Jx16 ET37

≈: width estimated from the original tyre size.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Mitsubishi Colt (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Mitsubishi Colt on Renault Twingo E-Tech?