Mitsubishi Colt PCD

1988–1992
VERIFIED
⌀67.1
Centre bore67.1 or 56.1 or 60.1 mm
Offset (ET)ET37 to ET46
Fixing typeEcrous - 12x1.50
Tightening torque108 Nm
Original tyres185/60R14, 175/70R13, 175/65R14, 195/50R15
⚠ This model comes with 4x114.3 or 4x100 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Fitting wheels on a Mitsubishi Colt

A Mitsubishi Colt (1988–1992) uses a 4x114.3 or 4x100 PCD and a centre bore of 67.1 or 56.1 or 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x114.3 or 4x100 required. See all vehicles with 4x114.3.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET37 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 185/60R14, 175/70R13, 175/65R14, 195/50R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (5)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x114.3 67.1 mm — ET46 185/60R14
Version 2 4x100 56.1 mm — ET46 175/70R13
Version 3 4x114.3 67.1 mm — ET46 175/65R14
Version 4 4x114.3 67.1 mm — ET46 195/50R15
Version 5 4x100 60.1 mm — ET37 195/55R16

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mitsubishi Colt without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your Colt?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Mitsubishi Colt?

A Mitsubishi Colt (1988–1992) can have a 4x114.3 or 4x100 PCD depending on the version: check on an original wheel.

Does a Mitsubishi Colt need a hub centric ring?

The centre bore (hub diameter) of a Mitsubishi Colt is 67.1 or 56.1 or 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mitsubishi Colt?

The recorded original offset is ET37 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mitsubishi Colt?

The specified tightening torque is 108 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mitsubishi Colt?

With the same PCD (4x114.3) and the same centre bore (67.1 mm), these include: Mitsubishi Lancer 1.3i, 1.6i, Mitsubishi Carisma 1.6, 1.8GDi,1.9TD, Mitsubishi Space Star, Mitsubishi Carisma 1.8i. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.