FRENES

Wheels from Seat Leon IV on Seat Alhambra II: compatible?

Yes, the hub is identical

Same 5x112 PCD and same 57.1 mm centre bore: wheels from Seat Leon IV bolt on and centre on Seat Alhambra II without rings. You still need to check the offset and tyres, detailed below.

Seat Leon IVfrom 2020Seat Alhambra II2010–2020
PCD5x1125x112
Centre bore57.1 mm57.1 mm
ThreadM14x1.5M14x1.5
Original wheels 6Jx15 ET43
6.5Jx16 ET46
7Jx16 ET43
7.5Jx17 ET46		 6.5Jx16 ET33
6.5Jx16 ET33
7Jx17 ET39
7.5Jx18 ET35

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Seat Leon IV is compared with the one from Seat Alhambra II of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 6.5Jx16 ET46 · 205/55R16 — Risk of rubbing

    Compared with the original 6.5Jx16 ET33 on Seat Alhambra II: shock absorber side +13 mm, wheel arch side −13 mm, tyre diameter −3.1 % : fit it with the original tyre size of Seat Alhambra II (205/60R16), not that of Seat Leon IV. Check in detail

  • 7Jx16 ET43 · 205/55R16 — Risk of rubbing

    Compared with the original 6.5Jx16 ET33 on Seat Alhambra II: shock absorber side +16.4 mm, wheel arch side −3.7 mm, tyre diameter −3.1 % : fit it with the original tyre size of Seat Alhambra II (205/60R16), not that of Seat Leon IV. Check in detail

  • 7.5Jx17 ET46 · 225/45R17 — Risk of rubbing

    Compared with the original 7Jx17 ET39 on Seat Alhambra II: shock absorber side +13.4 mm, wheel arch side −0.6 mm, tyre diameter −3.4 % : fit it with the original tyre size of Seat Alhambra II (225/50R17), not that of Seat Leon IV. Check in detail

  • 6Jx15 ET43 · 195/65R15

    Seat Alhambra II has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Seat Alhambra II (M14x1.5), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from Seat Alhambra II on Seat Leon IV?