Yes, the hub is identical
Same 4x100 PCD and same 60.1 mm centre bore: wheels from Suzuki Carry bolt on and centre on Renault Clio 2 without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Suzuki Carry is compared with the one from Renault Clio 2 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- !
≈5Jx13 ET45 · 155/70R13 — Check on the car
Compared with the original 5Jx13 ET36 on Renault Clio 2: shock absorber side +9 mm, wheel arch side −9 mm, tyre diameter −2.5 % : fit it with the original tyre size of Renault Clio 2 (165/70R13), not that of Suzuki Carry.
Comparison for guidance only (estimated width). Check in detail
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Renault Clio 2 (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Renault Clio 2 on Suzuki Carry?