Suzuki Carry PCD

1990–1995

VERIFIED

Centre bore60.1 mm

Offset (ET)ET45

Fixing typeEcrous - 12x1.25

Original tyres155/70R13

⚠ This model comes with 4x114.3 or 4x100 depending on the year or version. Check on an original wheel or with a professional before buying anything.

Hub centric rings 60.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Suzuki Carry

A Suzuki Carry (1990–1995) uses a 4x114.3 or 4x100 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 or 4x100 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 155/70R13. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

Version	PCD	Centre bore	Wheel	Offset	Tyre
Version 1	4x114.3	60.1 mm	—	ET45	155/70R13
Version 2	4x100	60.1 mm	—	ET45	155/70R13

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Suzuki Carry without rings. Offset, width, diameter and caliper clearance still need checking.

Suzuki Alto 1985–1995 Suzuki Swift 1984–2003 Subaru Justy 1984–1994 Toyota Celica 1971–1977

Will wheels from another vehicle fit your Carry?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Suzuki Carry?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Nissan Kubistar 2003–2009 Wheels from Renault Clio 2 1998–2005 Wheels from Renault Megane 1 1995–2002 Wheels from Renault Clio 1 1991–1998

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 60.1 mm, and will not fit if it is smaller.

Suzuki Cappuccino ⌀67.1 Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6 Chevrolet Epica ⌀56.6 Smart Forfour ⌀67.1

Frequently asked questions

What is the PCD of a Suzuki Carry?

A Suzuki Carry (1990–1995) can have a 4x114.3 or 4x100 PCD depending on the version: check on an original wheel.

Does a Suzuki Carry need a hub centric ring?

The centre bore (hub diameter) of a Suzuki Carry is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Suzuki Carry?

The recorded original offset is ET45 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Suzuki Carry?

With the same PCD (4x114.3) and the same centre bore (60.1 mm), these include: Suzuki Alto, Suzuki Swift, Subaru Justy, Toyota Celica. Offset, width and rim diameter still need checking for each vehicle.

Other Suzuki models

E-Vitara 5x114.3 Invicto 5x114.3 Across 5x114.3 Swace 5x114.3 Alivio 4x100 Celerio 4x100 S-Cross 5x114.3 Swift 4WD 4x100 Kizashi 5x114.3 Splash 4x100 SX4 5x114.3 Swift Sport 5x114.3 All Suzuki →

Does a value look wrong, or is a version missing? Let us know, we check every report.