Same 4x100 PCD and same 54.1 mm centre bore: wheels from Suzuki Swift 4WD bolt on and centre on Suzuki Ignis III without rings. You still need to check the offset and tyres, detailed below.
| Suzuki Swift 4WD2010–2017 | Suzuki Ignis IIIfrom 2016 | |
|---|---|---|
| PCD | 4x100 | 4x100 |
| Centre bore | 54.1 mm | 54.1 mm |
| Thread | M12x1.50 | M12x1.25 |
| Original wheels | 5Jx15 ET40 | 5Jx15 ET40 5Jx16 ET40 |
≈: width estimated from the original tyre size.
Each original wheel from Suzuki Swift 4WD is compared with the one from Suzuki Ignis III of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 5Jx15 ET40 on Suzuki Ignis III: shock absorber side 0 mm, wheel arch side 0 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Suzuki Ignis III (M12x1.25), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Suzuki Ignis III on Suzuki Swift 4WD?