FRENES

Suzuki Ignis III PCD

from 2016
VERIFIED
⌀54.1
PCD4x100
Centre bore54.1 mm
Offset (ET)ET40
Fixing typeM12x1.25
Tightening torque95 Nm
Original tyres175/65R15, 175/60R16
MF/MZ, restylage 2020, 1.2 et 1.2 hybride
Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Suzuki Ignis III

A Suzuki Ignis III (from 2016) uses a 4x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25, tightened to 95 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/65R15, 175/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Suzuki Ignis

Previous generation: Suzuki Ignis II (2003–2008) — same 4x100 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Ignis 2000–2003 · 4x100 Ignis II 2003–2008 · 4x100 Ignis III from 2016

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 54.1 mm 5Jx15 ET40 175/65R15
Version 2 4x100 54.1 mm 5Jx16 ET40 175/60R16

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Suzuki Ignis III without rings. Offset, width, diameter and caliper clearance still need checking.

Suzuki Swift VI from 2024 Suzuki Swift V 2017–2024 Suzuki Alivio 2015–2021 Suzuki Celerio 2015–2021 Suzuki Swift 4WD 2010–2017 Suzuki Splash 2008–2015 Suzuki Ignis II 2003–2008 Suzuki Liana 2001–2007 Suzuki Ignis 2000–2003 Suzuki Wagon R plus 1997–2000 Suzuki Baleno 1995–2002 Suzuki Esteem 1995–2002 Suzuki Alto 1985–1995 Suzuki Swift 1984–2003 Hyundai Inster from 2024 Hyundai Bayon from 2021

Will wheels from another vehicle fit your Ignis III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Suzuki Ignis III?

A Suzuki Ignis III (from 2016) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Suzuki Ignis III need a hub centric ring?

The centre bore (hub diameter) of a Suzuki Ignis III is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Suzuki Ignis III?

The recorded original offset is ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Suzuki Ignis III?

The specified tightening torque is 95 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Suzuki Ignis III?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Suzuki Swift VI, Suzuki Swift V, Suzuki Alivio, Suzuki Celerio. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.