Same 4x100 PCD and same 54.1 mm centre bore: wheels from Toyota IQ bolt on and centre on Toyota Yaris III without rings. You still need to check the offset and tyres, detailed below.
| Toyota IQfrom 2009 | Toyota Yaris III2011–2020 | |
|---|---|---|
| PCD | 4x100 | 4x100 |
| Centre bore | 54.1 mm | 54.1 mm |
| Thread | Ecrous - 12x1.50 | M12x1.50 |
| Original wheels | 5Jx15 ET45 | 5Jx14 ET39 5Jx15 ET39 |
≈: width estimated from the original tyre size.
Each original wheel from Toyota IQ is compared with the one from Toyota Yaris III of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
Compared with the original 5Jx15 ET39 on Toyota Yaris III: shock absorber side +6 mm, wheel arch side −6 mm, tyre diameter +0 %. Check in detail
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota Yaris III (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Toyota Yaris III on Toyota IQ?