FRENES

Toyota Yaris III PCD

2011–2020
VERIFIED
⌀54.1
PCD4x100
Centre bore54.1 mm
Offset (ET)ET39
Fixing typeM12x1.50
Tightening torque103 Nm
Original tyres175/70R14, 175/65R15
Hub centric rings 54.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota Yaris III

A Toyota Yaris III (2011–2020) uses a 4x100 PCD and a centre bore of 54.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x100 required. See all vehicles with 4x100.
  • Centre bore: the wheel must have a centre bore of 54.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 54.1 mm.
  • Offset: the original is ET39. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.50, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R14, 175/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x100 54.1 mm 5Jx14 ET39 175/70R14
Version 2 4x100 54.1 mm 5Jx15 ET39 175/65R15

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 54.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota Yaris III without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota Aygo X 2021–2025 Toyota IQ from 2009 Toyota Aygo 2005–2022 Toyota Yaris II 2005–2011 Toyota Yaris II 17 inch 2005–2011 Toyota Corolla Verso 2002–2004 Toyota BB 2000–2016 Toyota Yaris I 1999–2005 Toyota Yaris Verso 1999–2007 Toyota Prius 1997–2003 Toyota Paseo 1996–2000 Toyota Carina 4 trou 1988–1992 Toyota Corolla 1987–1997 Toyota MR2 1984–1988 Toyota Starlet 1984–1989 Toyota Tercel 1981–1990

Will wheels from another vehicle fit your Yaris III?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota Yaris III?

A Toyota Yaris III (2011–2020) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Toyota Yaris III need a hub centric ring?

The centre bore (hub diameter) of a Toyota Yaris III is 54.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota Yaris III?

The recorded original offset is ET39 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota Yaris III?

The specified tightening torque is 103 Nm for M12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota Yaris III?

With the same PCD (4x100) and the same centre bore (54.1 mm), these include: Toyota Aygo X, Toyota IQ, Toyota Aygo, Toyota Yaris II. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.