Yes, the hub is identical
Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from Toyota RAV4 V bolt on and centre on Toyota BZ4X without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Toyota RAV4 V is compared with the one from Toyota BZ4X of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
7Jx18 ET35 · 225/60R18 — Fits like the original
Compared with the original 7.5Jx18 ET40 on Toyota BZ4X: shock absorber side −11.4 mm, wheel arch side −1.4 mm, tyre diameter −1.6 %.
Check in detail
- ?
7Jx17 ET35 · 225/65R17
Toyota BZ4X has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.
- ?
7.5Jx19 ET40 · 235/55R19
Toyota BZ4X has no 19-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Toyota BZ4X (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Toyota BZ4X on Toyota RAV4 V?