FRENES

Toyota RAV4 V PCD

from 2019
VERIFIED
⌀60.1
PCD5x114.3
Centre bore60.1 mm
Offset (ET)ET35 to ET40
Fixing typeM12x1.5
Tightening torque103 Nm
Original tyres225/65R17, 225/60R18, 235/55R19
Hub centric rings 60.1 mm → Wheel spacers 5x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Toyota RAV4 V

A Toyota RAV4 V (from 2019) uses a 5x114.3 PCD and a centre bore of 60.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x114.3 required. See all vehicles with 5x114.3.
  • Centre bore: the wheel must have a centre bore of 60.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 60.1 mm.
  • Offset: the original is ET35 to ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.5, tightened to 103 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/65R17, 225/60R18, 235/55R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x114.3 60.1 mm 7Jx17 ET35 225/65R17
Version 2 5x114.3 60.1 mm 7Jx18 ET35 225/60R18
Version 3 5x114.3 60.1 mm 7.5Jx19 ET40 235/55R19

Vehicles with the same PCD and centre bore

Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from these vehicles bolt on and centre on a Toyota RAV4 V without rings. Offset, width, diameter and caliper clearance still need checking.

Toyota BZ4X from 2022 Toyota Yaris Cross from 2021 Toyota Corolla Cross from 2020 Toyota Corolla E210 from 2019 Toyota C-HR from 2016 Toyota Corolla EU 2016–2019 Toyota Mirai 2014–2021 Toyota Auris II 2012–2018 Toyota Prius Wagon from 2012 Toyota Sienna 2011–2020 Toyota Verso from 2009 Toyota Avensis III from 2008 Toyota Auris I 2007–2012 Toyota Avensis II 2.2 Diesel 2005–2008 Toyota Mark X 2004–2009 Toyota Crown Athlete 2003–2008

Will wheels from another vehicle fit your RAV4 V?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Toyota RAV4 V?

A Toyota RAV4 V (from 2019) has a PCD of 5x114.3: 5 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Toyota RAV4 V need a hub centric ring?

The centre bore (hub diameter) of a Toyota RAV4 V is 60.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Toyota RAV4 V?

The recorded original offset is ET35 to ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Toyota RAV4 V?

The specified tightening torque is 103 Nm for M12x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Toyota RAV4 V?

With the same PCD (5x114.3) and the same centre bore (60.1 mm), these include: Toyota BZ4X, Toyota Yaris Cross, Toyota Corolla Cross, Toyota Corolla E210. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.