FRENES

Wheels from Toyota Yaris Cross on BYD Atto 3: compatible?

Yes, the hub is identical

Same 5x114.3 PCD and same 60.1 mm centre bore: wheels from Toyota Yaris Cross bolt on and centre on BYD Atto 3 without rings. You still need to check the offset and tyres, detailed below.

Toyota Yaris Crossfrom 2021BYD Atto 3from 2021
PCD5x114.35x114.3
Centre bore60.1 mm60.1 mm
ThreadM12x1.50M12x1.50
Original wheels 6.5Jx16 ET45
7Jx17 ET50
7Jx18 ET50		 ≈7Jx18 ET40

≈: width estimated from the original tyre size.

Wheel by wheel: offset and tyres

Each original wheel from Toyota Yaris Cross is compared with the one from BYD Atto 3 of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.

  • 7Jx18 ET50 · 215/50R18 — Check on the car

    Compared with the original ≈7Jx18 ET40 on BYD Atto 3: shock absorber side +10 mm, wheel arch side −10 mm, tyre diameter −3.1 % : fit it with the original tyre size of BYD Atto 3 (215/55R18), not that of Toyota Yaris Cross. Comparison for guidance only (estimated width). Check in detail

  • 6.5Jx16 ET45 · 205/65R16

    BYD Atto 3 has no 16-inch original wheel in our data: check the approved fitments and caliper clearance.

  • 7Jx17 ET50 · 215/55R17

    BYD Atto 3 has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.

Before fitting the wheels

An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of BYD Atto 3 (M12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.

And the other way round: wheels from BYD Atto 3 on Toyota Yaris Cross?