Yes, the hub is identical
Same 5x100 PCD and same 54.1 mm centre bore: wheels from Toyota Yaris IV bolt on and centre on Lexus CT200h without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Toyota Yaris IV is compared with the one from Lexus CT200h of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
6Jx16 ET50 · 195/55R16 — Fits like the original
Compared with the original ≈6.5Jx16 ET45 on Lexus CT200h: shock absorber side −1.4 mm, wheel arch side −11.4 mm, tyre diameter −1.7 %.
Comparison for guidance only (estimated width). Check in detail
- ?
6Jx15 ET45 · 185/65R15
Lexus CT200h has no 15-inch original wheel in our data: check the approved fitments and caliper clearance.
- ?
6.5Jx17 ET50 · 205/45R17
Lexus CT200h has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Lexus CT200h (Ecrous - 12x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Lexus CT200h on Toyota Yaris IV?