Yes, the hub is identical
Same 5x112 PCD and same 57.1 mm centre bore: wheels from Volkswagen Touran II bolt on and centre on Volkswagen Sharan without rings. You still need to check the offset and tyres, detailed below.
≈: width estimated from the original tyre size.
Wheel by wheel: offset and tyres
Each original wheel from Volkswagen Touran II is compared with the one from Volkswagen Sharan of the same diameter: how much closer the wheel gets to the shock absorber or how far it sticks out of the wheel arch, and whether the tyre keeps the same overall diameter.
- ✓
6.5Jx16 ET48 · 205/60R16 — Fits like the original
Compared with the original ≈7Jx16 ET39 on Volkswagen Sharan: shock absorber side +2.7 mm, wheel arch side −15.4 mm, tyre diameter −1.8 %.
Comparison for guidance only (estimated width). Check in detail
- ?
6.5Jx17 ET52 · 215/55R17
Volkswagen Sharan has no 17-inch original wheel in our data: check the approved fitments and caliper clearance.
- ?
7Jx18 ET52 · 225/45R18
Volkswagen Sharan has no 18-inch original wheel in our data: check the approved fitments and caliper clearance.
Before fitting the wheels
An identical hub is not enough: offset, width and diameter change the position of the wheel, and larger calipers can touch a smaller wheel. Original wheels often use bolts or nuts with a specific seat: keep the fixings intended for the wheel, with the thread of Volkswagen Sharan (M14x1.50), tightened to the torque shown on its vehicle page. Finally, check that the size is among the approved fitments for your vehicle. This comparison is for guidance only: have the fitting approved by a professional.
And the other way round: wheels from Volkswagen Sharan on Volkswagen Touran II?