FRENES

Volkswagen Sharan PCD

1995–2010
VERIFIED
⌀57.1
PCD5x112
Centre bore57.1 mm
Offset (ET)ET39 to ET55
Fixing typeM14x1.50
Tightening torque170 Nm
Original tyres195/65R15, 215/60R16
Hub centric rings 57.1 mm → Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Volkswagen Sharan

A Volkswagen Sharan (1995–2010) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET39 to ET55. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.50, tightened to 170 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 195/65R15, 215/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 57.1 mm — ET55 195/65R15
Version 2 5x112 57.1 mm — ET39 215/60R16

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Volkswagen Sharan without rings. Offset, width, diameter and caliper clearance still need checking.

Volkswagen Passat B9 from 2024 Volkswagen Tayron from 2024 Volkswagen ID.7 from 2023 Volkswagen ID.5 axe arrière from 2022 Volkswagen ID.5 axe avant from 2022 Volkswagen ID.Buzz axe arrière from 2022 Volkswagen ID.Buzz axe avant from 2022 Volkswagen ID.6 Crozz axe arrière from 2021 Volkswagen ID.6 Crozz axe avant from 2021 Volkswagen ID.6 X axe arrière from 2021 Volkswagen ID.6 X axe avant from 2021 Volkswagen Golf 8 GTI from 2020 Volkswagen Golf 8 R from 2020 Volkswagen ID.3 from 2020 Volkswagen ID.4 from 2020 Volkswagen Golf 8 from 2019

Will wheels from another vehicle fit your Sharan?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Volkswagen Sharan?

A Volkswagen Sharan (1995–2010) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Volkswagen Sharan need a hub centric ring?

The centre bore (hub diameter) of a Volkswagen Sharan is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Volkswagen Sharan?

The recorded original offset is ET39 to ET55 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Volkswagen Sharan?

The specified tightening torque is 170 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Volkswagen Sharan?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: Volkswagen Passat B9, Volkswagen Tayron, Volkswagen ID.7, Volkswagen ID.5 axe arrière. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.