Proton Putra - Coupe PCD

1995–2000

VERIFIED

Centre bore56.1 mm

Offset (ET)ET40

Fixing type-

Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Proton Putra - Coupe

A Proton Putra - Coupe (1995–2000) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Proton Putra - Coupe without rings. Offset, width, diameter and caliper clearance still need checking.

Proton Persona 2007–2010 Proton Impian 2000–2011 Proton Waja 2000–2011 Proton Compact 1995–2005 Proton Satria 1995–2005 Proton Wira 1993–2007 Nissan Dayz from 2023 Honda WR-V from 2017 MG MG3 from 2017 Mini Coupe 2011–2015 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Peugeot iON from 2009 Honda Fit from 2008 Mini Cooper Clubman from 2007

Will wheels from another vehicle fit your Putra - Coupe?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1 Hyundai i20 III ⌀54.1

Frequently asked questions

What is the PCD of a Proton Putra - Coupe?

A Proton Putra - Coupe (1995–2000) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Proton Putra - Coupe need a hub centric ring?

The centre bore (hub diameter) of a Proton Putra - Coupe is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Proton Putra - Coupe?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Proton Putra - Coupe?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Proton Persona, Proton Impian, Proton Waja, Proton Compact. Offset, width and rim diameter still need checking for each vehicle.

Other Proton models

Persona 4x100 Impian 4x100 Waja 4x100 Compact 4x100 Satria 4x100 Wira 4x100 All Proton →

Does a value look wrong, or is a version missing? Let us know, we check every report.