Mini Coupe PCD

2011–2015

VERIFIED

Centre bore56.1 mm

Offset (ET)ET45

Fixing typeM14x1.25

Tightening torque140 Nm

Original tyres175/65R15

Hub centric rings 56.1 mm → Wheel spacers 4x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Mini Coupe

A Mini Coupe (2011–2015) uses a 4x100 PCD and a centre bore of 56.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x100 required. See all vehicles with 4x100.
Centre bore: the wheel must have a centre bore of 56.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.1 mm.
Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/65R15. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x100 PCD and same 56.1 mm centre bore: wheels from these vehicles bolt on and centre on a Mini Coupe without rings. Offset, width, diameter and caliper clearance still need checking.

Mini Cooper Clubman from 2007 Mini Cooper Clubman S from 2007 Mini Cooper S 2001–2006 Mini One 2001–2006 Mini Cooper 1959–2000 Nissan Dayz from 2023 Honda WR-V from 2017 MG MG3 from 2017 Citroen C-Zero from 2010 Mitsubishi i-MiEV from 2010 Honda Insight 2009–2014 Peugeot iON from 2009 Honda Fit from 2008 Proton Persona 2007–2010 Rover CityRover 2004–2006 Rover Streetwise 2004–2006

Will wheels from another vehicle fit your Coupe?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Mini Coupe?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Mini Cooper Clubman from 2007 Wheels from Mini One 2001–2006 Wheels from Mini Cooper 1959–2000 Wheels from MG MG3 from 2017

Same PCD, different centre bore

These vehicles also use 4x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.1 mm, and will not fit if it is smaller.

Renault Twingo E-Tech ⌀60.1 Hyundai Inster ⌀54.1 Dacia Jogger ⌀60.1 Dacia Spring ⌀60.1 Hyundai Bayon ⌀54.1 Toyota Aygo X ⌀54.1 Dacia Sandero III ⌀60.1 Hyundai i20 III ⌀54.1

Frequently asked questions

What is the PCD of a Mini Coupe?

A Mini Coupe (2011–2015) has a PCD of 4x100: 4 studs or bolts spaced around a circle 100 mm in diameter.

Does a Mini Coupe need a hub centric ring?

The centre bore (hub diameter) of a Mini Coupe is 56.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Mini Coupe?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Mini Coupe?

The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Mini Coupe?

With the same PCD (4x100) and the same centre bore (56.1 mm), these include: Mini Cooper Clubman, Mini Cooper Clubman S, Mini Cooper S, Mini One. Offset, width and rim diameter still need checking for each vehicle.

Other Mini models

Paceman 5x120 Countryman 5x112 Cooper Clubman 4x100 Cooper Clubman S 4x100 Cooper S 4x100 One 4x100 Cooper 4x100 All Mini →

Does a value look wrong, or is a version missing? Let us know, we check every report.