FRENES

Renault Master PCD

1980–1997
VERIFIED
⌀141.5
PCD5x190 or 5x130
Centre bore141.5 or 89.1 mm
Offset (ET)ET65 to ET66
Fixing typeEcrous - 14x1.50
Tightening torque155 Nm
⚠ This model comes with 5x190 or 5x130 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 141.5 mm → Wheel spacers 5x190(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Renault Master

A Renault Master (1980–1997) uses a 5x190 or 5x130 PCD and a centre bore of 141.5 or 89.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x190 or 5x130 required. See all vehicles with 5x190.
  • Centre bore: the wheel must have a centre bore of 141.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 141.5 mm.
  • Offset: the original is ET65 to ET66. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 14x1.50, tightened to 155 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x190 141.5 mm — ET65 —
Version 2 5x130 89.1 mm — ET66 —

Will wheels from another vehicle fit your Master?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Renault Master?

A Renault Master (1980–1997) can have a 5x190 or 5x130 PCD depending on the version: check on an original wheel.

Does a Renault Master need a hub centric ring?

The centre bore (hub diameter) of a Renault Master is 141.5 or 89.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Renault Master?

The recorded original offset is ET65 to ET66 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Renault Master?

The specified tightening torque is 155 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Does a value look wrong, or is a version missing? Let us know, we check every report.