Roues simples (5x130). Largeur de jante 6J selon tirewheelguide, 6.5J selon koleso. Versions à roues arrière jumelées en 6x200 non reprises (une seule source).
A Renault Master 4 (from 2024) uses a 5x130 PCD and a centre bore of 89.1 mm.
Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.
Centre bore: the wheel must have a centre bore of 89.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 89.1 mm.
Offset: the original is ET66. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.5. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/75R16, 215/75R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).
Generations of the Renault Master
Previous generation: Renault Master (1980–1997) — same 5x130 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.
The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.
Version
PCD
Centre bore
Wheel
Offset
Tyre
Version 1
5x130
89.1 mm
6Jx16
ET66
205/75R16
Version 2
5x130
89.1 mm
6Jx16
ET66
215/75R16
Vehicles with the same PCD and centre bore
Same 5x130 PCD and same 89.1 mm centre bore: wheels from these vehicles bolt on and centre on a Renault Master 4 without rings. Offset, width, diameter and caliper clearance still need checking.
These vehicles also use 5x130 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 89.1 mm, and will not fit if it is smaller.
A Renault Master 4 (from 2024) has a PCD of 5x130: 5 studs or bolts spaced around a circle 130 mm in diameter.
Does a Renault Master 4 need a hub centric ring?
The centre bore (hub diameter) of a Renault Master 4 is 89.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.
What offset (ET) for a Renault Master 4?
The recorded original offset is ET66 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.
Which vehicles have the same PCD as a Renault Master 4?
With the same PCD (5x130) and the same centre bore (89.1 mm), these include: Renault Master FWD, Renault Master, Nissan NV400, Nissan Interstar. Offset, width and rim diameter still need checking for each vehicle.
Does a value look wrong, or is a version missing? Let us know, we check every report.
Cookies : we use audience measurement cookies (Google Analytics) and, if you accept, advertising cookies. You can change your mind at any time via “Manage cookies” at the bottom of the page. Learn more