FRENES

Audi RS3 8Y PCD

from 2021
VERIFIED
⌀57.1
PCD5x112
Centre bore57.1 mm
Offset (ET)ET25 to ET46
Fixing typeM14x1.5
Tightening torque120 Nm
Original tyres265/30R19, 245/35R19
Montes décalées, plus large à l'avant
Performance parts for your Audi RS3 8Y Brakes, suspension, intake, exhaust… at STR Performance, French tuning shop. See the parts → (partner link)
Wheel spacers for this vehicle, from €29.95(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi RS3 8Y

A Audi RS3 8Y (from 2021) uses a 5x112 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
  • Offset: the original is ET25 to ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.5, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 265/30R19, 245/35R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Audi RS3

Previous generation: Audi RS3 8V (2015–2020) — same 5x112 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

RS3 2011–2015 · 5x112 RS3 8V 2015–2020 · 5x112 RS3 8Y from 2021

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Avant 5x112 57.1 mm 9Jx19 ET25 265/30R19
Arrière 5x112 57.1 mm 8Jx19 ET46 245/35R19

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Audi RS3 8Y without rings. Offset, width, diameter and caliper clearance still need checking.

Audi Q4 E-TRON from 2021 Audi A3 8Y from 2020 Audi S3 8Y from 2020 Audi RS Q3 from 2019 Audi SQ2 from 2019 Audi Q3 F3 from 2018 Audi Q2 2016–2021 Audi TTS 8S 2016–2023 Audi RS3 8V 2015–2020 Audi TT 2014–2023 Audi Q3 RS 2013–2018 Audi S3 8V 2013–2020 Audi A3 8V 2012–2020 Audi Q3 2011–2018 Audi RS3 2011–2015 Audi TT RS 2009–2014

Will wheels from another vehicle fit your RS3 8Y?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Audi RS3 8Y?

A Audi RS3 8Y (from 2021) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a Audi RS3 8Y need a hub centric ring?

The centre bore (hub diameter) of a Audi RS3 8Y is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi RS3 8Y?

The recorded original offset is ET25 to ET46 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi RS3 8Y?

The specified tightening torque is 120 Nm for M14x1.5 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi RS3 8Y?

With the same PCD (5x112) and the same centre bore (57.1 mm), these include: Audi Q4 E-TRON, Audi A3 8Y, Audi S3 8Y, Audi RS Q3. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.