Audi A1 Citycarver PCD

2019–2022

VERIFIED

Centre bore57.1 mm

Offset (ET)ET40

Fixing typeM14x1.50

Tightening torque120 Nm

Original tyres205/60R16

Hub centric rings 57.1 mm → Wheel spacers 5x100(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Audi A1 Citycarver

A Audi A1 Citycarver (2019–2022) uses a 5x100 PCD and a centre bore of 57.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x100 required. See all vehicles with 5x100.
Centre bore: the wheel must have a centre bore of 57.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 57.1 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M14x1.50, tightened to 120 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 205/60R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x100 PCD and same 57.1 mm centre bore: wheels from these vehicles bolt on and centre on a Audi A1 Citycarver without rings. Offset, width, diameter and caliper clearance still need checking.

Audi S1 2014–2018 Audi S1 Sportback 2014–2018 Audi A1 2010–2018 Audi TT 8N 2003–2007 Audi A2 1999–2006 Audi S3 1999–2003 Audi TT convertible 1.8T 1999–2007 Audi TT coupe 1.8T 1998–2006 Audi A3 8L 1996–2003 MG Astor from 2021 Skoda Fabia IV from 2021 Volkswagen Taigo from 2021 Skoda Kamiq GT from 2020 Skoda Kamiq from 2019 Skoda Scala from 2019 Volkswagen T-Cross from 2019

Will wheels from another vehicle fit your A1 Citycarver?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Audi A1 Citycarver?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Audi S1 2014–2018 Wheels from Audi S1 Sportback 2014–2018 Wheels from Audi TT convertible 1.8T 1999–2007 Wheels from Audi TT coupe 1.8T 1998–2006

Same PCD, different centre bore

These vehicles also use 5x100 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 57.1 mm, and will not fit if it is smaller.

Mazda Mazda2 Hybrid ⌀54.1 Toyota Aygo X ⌀60.1 Toyota Yaris IV ⌀54.1 Toyota Corolla US ⌀54.1 Subaru BRZ ⌀56.1 Toyota GT 86 ⌀56.1 Lexus CT200h ⌀54.1 Subaru XV ⌀56.1

Frequently asked questions

What is the PCD of a Audi A1 Citycarver?

A Audi A1 Citycarver (2019–2022) has a PCD of 5x100: 5 studs or bolts spaced around a circle 100 mm in diameter.

Does a Audi A1 Citycarver need a hub centric ring?

The centre bore (hub diameter) of a Audi A1 Citycarver is 57.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Audi A1 Citycarver?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Audi A1 Citycarver?

The specified tightening torque is 120 Nm for M14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Audi A1 Citycarver?

With the same PCD (5x100) and the same centre bore (57.1 mm), these include: Audi S1, Audi S1 Sportback, Audi A1, Audi TT 8N. Offset, width and rim diameter still need checking for each vehicle.

Other Audi models

Q4 E-TRON 5x112 A3 8Y 5x112 RS Q8 5x112 RS6 C8 5x112 SQ2 5x112 RS Q3 5x112 A4 5x112 S6 C8 5x112 SQ8 5x112 A8 D5 5x112 A7 5x112 E-Tron 5x112 All Audi →

Does a value look wrong, or is a version missing? Let us know, we check every report.