FRENES

BMW 2 Serie Coupe G42 PCD

from 2021
VERIFIED
⌀66.6
PCD5x112
Centre bore66.6 mm
Offset (ET)ET27 to ET40
Fixing typeM14x1.25
Tightening torque140 Nm
Original tyres225/50R17, 225/40R19, 255/35R19
Wheel spacers 5x112(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a BMW 2 Serie Coupe G42

A BMW 2 Serie Coupe G42 (from 2021) uses a 5x112 PCD and a centre bore of 66.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x112 required. See all vehicles with 5x112.
  • Centre bore: the wheel must have a centre bore of 66.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.6 mm.
  • Offset: the original is ET27 to ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M14x1.25, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 225/50R17, 225/40R19, 255/35R19. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the BMW 2 Serie Coupe

Previous generation: BMW 2 Serie Coupe F22 (2013–2021) — the bolt pattern changes (5x112 instead of 5x120): the wheels are not interchangeable.

2 Serie Coupe F22 2013–2021 · 5x120 2 Serie Coupe G42 from 2021

All recorded versions (3)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 5x112 66.6 mm 7.5Jx17 ET30 225/50R17
Avant 5x112 66.6 mm 8Jx19 ET27 225/40R19
Arrière 5x112 66.6 mm 8.5Jx19 ET40 255/35R19

Vehicles with the same PCD and centre bore

Same 5x112 PCD and same 66.6 mm centre bore: wheels from these vehicles bolt on and centre on a BMW 2 Serie Coupe G42 without rings. Offset, width, diameter and caliper clearance still need checking.

BMW 2 Serie Gran Coupe F74 from 2025 BMW 1 Serie F70 from 2024 BMW iX2 U10 from 2024 BMW X2 U10 from 2024 BMW X3 G45 from 2024 BMW I5 from 2023 BMW M2 G87 from 2023 BMW XM G09 axe arrière from 2023 BMW XM G09 axe avant from 2023 BMW 7 Serie G70 from 2022 BMW i7 from 2022 BMW iX1 U11 from 2022 BMW X1 U11 from 2022 BMW 2 Serie F44 from 2021 BMW i4 from 2021 BMW iX from 2021

Will wheels from another vehicle fit your 2 Serie Coupe G42?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a BMW 2 Serie Coupe G42?

A BMW 2 Serie Coupe G42 (from 2021) has a PCD of 5x112: 5 studs or bolts spaced around a circle 112 mm in diameter.

Does a BMW 2 Serie Coupe G42 need a hub centric ring?

The centre bore (hub diameter) of a BMW 2 Serie Coupe G42 is 66.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a BMW 2 Serie Coupe G42?

The recorded original offset is ET27 to ET40 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a BMW 2 Serie Coupe G42?

The specified tightening torque is 140 Nm for M14x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a BMW 2 Serie Coupe G42?

With the same PCD (5x112) and the same centre bore (66.6 mm), these include: BMW 2 Serie Gran Coupe F74, BMW 1 Serie F70, BMW iX2 U10, BMW X2 U10. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.