Buick Enclave PCD

2007–2018

VERIFIED

Centre bore78.1 mm

Offset (ET)ET35

Fixing type-

Tightening torque190 Nm

Hub centric rings 78.1 mm → Wheel spacers 6x132(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Buick Enclave

A Buick Enclave (2007–2018) uses a 6x132 PCD and a centre bore of 78.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 6x132 required. See all vehicles with 6x132.
Centre bore: the wheel must have a centre bore of 78.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 78.1 mm.
Offset: the original is ET35. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -, tightened to 190 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Will wheels from another vehicle fit your Enclave?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 6x132 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 78.1 mm, and will not fit if it is smaller.

Chevrolet Traverse ⌀74.5 GMC Acadia ⌀74.5 Saturn Outlook ⌀78

Frequently asked questions

What is the PCD of a Buick Enclave?

A Buick Enclave (2007–2018) has a PCD of 6x132: 6 studs or bolts spaced around a circle 132 mm in diameter.

Does a Buick Enclave need a hub centric ring?

The centre bore (hub diameter) of a Buick Enclave is 78.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Buick Enclave?

The recorded original offset is ET35. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Buick Enclave?

The specified tightening torque is 190 Nm for - fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Other Buick models

Envision 5x120 Encore 5x105 Lucerne 5x115 LaCrosse 5x115 Terraza 6x115 Rainier 6x127 Rendezvous 5x115 Park Avenue 5x115 Roadmaster 5x127 Apollo 5x120.65 Century 5x100 Regal 5x115 All Buick →

Does a value look wrong, or is a version missing? Let us know, we check every report.