FRENES

Cadillac SRX PCD

2004–2010
VERIFIED
⌀70.1
PCD6x115 or 6x120
Centre bore70.1 or 66.9 mm
Offset (ET)ET51 to ET53
Fixing typeEcrous - 12x1.50
Tightening torque140 Nm
⚠ This model comes with 6x115 or 6x120 depending on the year or version. Check on an original wheel or with a professional before buying anything.
Hub centric rings 70.1 mm → Wheel spacers 6x115(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Cadillac SRX

A Cadillac SRX (2004–2010) uses a 6x115 or 6x120 PCD and a centre bore of 70.1 or 66.9 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 6x115 or 6x120 required. See all vehicles with 6x115.
  • Centre bore: the wheel must have a centre bore of 70.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.1 mm.
  • Offset: the original is ET51 to ET53. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 6x115 70.1 mm — ET51 —
Version 2 6x120 66.9 mm — ET53 —

Vehicles with the same PCD and centre bore

Same 6x115 PCD and same 70.1 mm centre bore: wheels from these vehicles bolt on and centre on a Cadillac SRX without rings. Offset, width, diameter and caliper clearance still need checking.

Cadillac STS 2005–2011 Buick Terraza 2005–2007

Will wheels from another vehicle fit your SRX?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 6x115 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.1 mm, and will not fit if it is smaller.

Chevrolet Uplander ⌀70.3

Frequently asked questions

What is the PCD of a Cadillac SRX?

A Cadillac SRX (2004–2010) can have a 6x115 or 6x120 PCD depending on the version: check on an original wheel.

Does a Cadillac SRX need a hub centric ring?

The centre bore (hub diameter) of a Cadillac SRX is 70.1 or 66.9 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Cadillac SRX?

The recorded original offset is ET51 to ET53 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Cadillac SRX?

The specified tightening torque is 140 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Cadillac SRX?

With the same PCD (6x115) and the same centre bore (70.1 mm), these include: Cadillac STS, Buick Terraza. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.