Cadillac CTS-V PCD

2008–2020
VERIFIED
⌀67.1
Centre bore67.1 mm
Offset (ET)ET48
Fixing typeEcrous - 12x1.50
Tightening torque190 Nm

Fitting wheels on a Cadillac CTS-V

A Cadillac CTS-V (2008–2020) uses a 5x120.65 PCD and a centre bore of 67.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x120.65 required. See all vehicles with 5x120.65.
  • Centre bore: the wheel must have a centre bore of 67.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 67.1 mm.
  • Offset: the original is ET48. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.50, tightened to 190 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120.65 PCD and same 67.1 mm centre bore: wheels from these vehicles bolt on and centre on a Cadillac CTS-V without rings. Offset, width, diameter and caliper clearance still need checking.

Will wheels from another vehicle fit your CTS-V?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Cadillac CTS-V?

A Cadillac CTS-V (2008–2020) has a PCD of 5x120.65: 5 studs or bolts spaced around a circle 120.65 mm in diameter.

Does a Cadillac CTS-V need a hub centric ring?

The centre bore (hub diameter) of a Cadillac CTS-V is 67.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Cadillac CTS-V?

The recorded original offset is ET48. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Cadillac CTS-V?

The specified tightening torque is 190 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Cadillac CTS-V?

With the same PCD (5x120.65) and the same centre bore (67.1 mm), these include: Cadillac CTS. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.