Cadillac XLR PCD

2003–2009

VERIFIED

Centre bore70.3 mm

Offset (ET)ET61

Fixing typeEcrous - 12x1.50

Tightening torque140 Nm

Hub centric rings 70.3 mm → Wheel spacers 5x120.65(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Cadillac XLR

A Cadillac XLR (2003–2009) uses a 5x120.65 PCD and a centre bore of 70.3 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 5x120.65 required. See all vehicles with 5x120.65.
Centre bore: the wheel must have a centre bore of 70.3 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 70.3 mm.
Offset: the original is ET61. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.50, tightened to 140 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 5x120.65 PCD and same 70.3 mm centre bore: wheels from these vehicles bolt on and centre on a Cadillac XLR without rings. Offset, width, diameter and caliper clearance still need checking.

Cadillac Seville 1975–1979 Chevrolet Corvette C7 2013–2019 Chevrolet Corvette C6 2004–2013 Chevrolet Jimny from 1998 Chevrolet Corvette C5 1997–2004 Chevrolet Blazer 2WD 1986–2004 Chevrolet Blazer 4WD 1986–2004 Chevrolet Corvette C4 1984–1996 Chevrolet S10 1982–1993 Pontiac Firebird 1982–1992 Pontiac Trans Am 1982–1992 Buick Apollo 1977–1985 Buick Century 1977–1985 Pontiac Phoenix 1977–1979 Chevrolet Caprice 1971–1977 Pontiac Catalina 1971–1976

Will wheels from another vehicle fit your XLR?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 5x120.65 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 70.3 mm, and will not fit if it is smaller.

Cadillac CTS-V ⌀67.1 Cadillac CTS ⌀67.1 Jaguar XK ⌀73.8 Aston Martin DB7 ⌀74.1 Aston Martin Virage ⌀73.9 Aston Martin Lagonda ⌀73.9 Jaguar XJ ⌀74

Frequently asked questions

What is the PCD of a Cadillac XLR?

A Cadillac XLR (2003–2009) has a PCD of 5x120.65: 5 studs or bolts spaced around a circle 120.65 mm in diameter.

Does a Cadillac XLR need a hub centric ring?

The centre bore (hub diameter) of a Cadillac XLR is 70.3 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Cadillac XLR?

The recorded original offset is ET61. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Cadillac XLR?

The specified tightening torque is 140 Nm for Ecrous - 12x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Cadillac XLR?

With the same PCD (5x120.65) and the same centre bore (70.3 mm), these include: Cadillac Seville, Chevrolet Corvette C7, Chevrolet Corvette C6, Chevrolet Jimny. Offset, width and rim diameter still need checking for each vehicle.

Other Cadillac models

CT5 5x120 CT5-V 5x120 CT6-V 5x120 XT6 6x120 XT4 5x120 XT5 6x120 CT6 5x120 ATS 5x115 CTS-V 5x120.65 BLS 5x110 STS 6x115 SRX 6x115 All Cadillac →

Does a value look wrong, or is a version missing? Let us know, we check every report.