Datsun 1000 PCD

1968–1977

VERIFIED

Centre bore73 mm

Offset (ET)ET25

Fixing typeEcrous - 12x1.25

Hub centric rings 73 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Datsun 1000

A Datsun 1000 (1968–1977) uses a 4x114.3 PCD and a centre bore of 73 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 73 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 73 mm.
Offset: the original is ET25. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread Ecrous - 12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 73 mm centre bore: wheels from these vehicles bolt on and centre on a Datsun 1000 without rings. Offset, width, diameter and caliper clearance still need checking.

Datsun 180SX 1975–1979

Will wheels from another vehicle fit your 1000?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 73 mm, and will not fit if it is smaller.

Datsun 280Z ⌀73.1 Datsun 260Z ⌀73.1 Datsun 240Z ⌀73.1 Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Chery Fora ⌀56.6

Frequently asked questions

What is the PCD of a Datsun 1000?

A Datsun 1000 (1968–1977) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Datsun 1000 need a hub centric ring?

The centre bore (hub diameter) of a Datsun 1000 is 73 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Datsun 1000?

The recorded original offset is ET25. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Datsun 1000?

With the same PCD (4x114.3) and the same centre bore (73 mm), these include: Datsun 180SX. Offset, width and rim diameter still need checking for each vehicle.

Other Datsun models

180SX 4x114.3 280Z 4x114.3 260Z 4x114.3 240Z 4x114.3 All Datsun →

Does a value look wrong, or is a version missing? Let us know, we check every report.