FRENES

Nissan NV200 PCD

from 2010
VERIFIED
⌀66.1
PCD4x114.3
Centre bore66.1 mm
Offset (ET)ET45
Fixing typeEcrous - 12x1.25
Tightening torque108 Nm
Original tyres175/70R14
Hub centric rings 66.1 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Nissan NV200

A Nissan NV200 (from 2010) uses a 4x114.3 PCD and a centre bore of 66.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x114.3 required. See all vehicles with 4x114.3.
  • Centre bore: the wheel must have a centre bore of 66.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 66.1 mm.
  • Offset: the original is ET45. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 12x1.25, tightened to 108 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 175/70R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 66.1 mm centre bore: wheels from these vehicles bolt on and centre on a Nissan NV200 without rings. Offset, width, diameter and caliper clearance still need checking.

Nissan Evalia from 2012 Nissan Tiida from 2007 Nissan Versa from 2007 Nissan Cube 2002–2008 Nissan Almera N16 2000–2006 Nissan Sentra 2000–2006 Nissan Primera P11 1996–2002 Nissan Altima 1993–2001 Nissan Primera P10 1990–1996 Nissan 200SX S13 1989–1994 Nissan Laurel 1985–1989 Nissan 300ZX Z31 1984–1990 Nissan Bluebird 1983–1998 Nissan Prairie 1983–1988 Nissan Sunny B11 1982–1986 Nissan Cherry 1979–1987

Will wheels from another vehicle fit your NV200?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Nissan NV200?

A Nissan NV200 (from 2010) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Nissan NV200 need a hub centric ring?

The centre bore (hub diameter) of a Nissan NV200 is 66.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Nissan NV200?

The recorded original offset is ET45. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Nissan NV200?

The specified tightening torque is 108 Nm for Ecrous - 12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Nissan NV200?

With the same PCD (4x114.3) and the same centre bore (66.1 mm), these include: Nissan Evalia, Nissan Tiida, Nissan Versa, Nissan Cube. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.