Chery Fora PCD

from 2006

VERIFIED

Centre bore56.6 mm

Offset (ET)ET46

Fixing type-

Hub centric rings 56.6 mm → Wheel spacers 4x114.3(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Chery Fora

A Chery Fora (from 2006) uses a 4x114.3 PCD and a centre bore of 56.6 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x114.3 required. See all vehicles with 4x114.3.
Centre bore: the wheel must have a centre bore of 56.6 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 56.6 mm.
Offset: the original is ET46. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x114.3 PCD and same 56.6 mm centre bore: wheels from these vehicles bolt on and centre on a Chery Fora without rings. Offset, width, diameter and caliper clearance still need checking.

Chevrolet Epica from 2006 Chevrolet Evanda 2003–2006 Chevrolet Lacetti 2002–2011 Chevrolet Rezzo 2001–2008 Chevrolet Tacuma 2001–2008 Chevrolet Leganza 1998–2003 Chevrolet Nubira 1997–2003

Will wheels from another vehicle fit your Fora?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x114.3 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 56.6 mm, and will not fit if it is smaller.

Nissan Evalia ⌀66.1 Nissan NV200 ⌀66.1 Nissan Tiida ⌀66.1 Nissan Versa ⌀66.1 Smart Forfour ⌀67.1 Kia Cerato ⌀67.1 Mitsubishi Lancer 1.3i, 1.6i ⌀67.1 Nissan Cube ⌀66.1

Frequently asked questions

What is the PCD of a Chery Fora?

A Chery Fora (from 2006) has a PCD of 4x114.3: 4 studs or bolts spaced around a circle 114.3 mm in diameter.

Does a Chery Fora need a hub centric ring?

The centre bore (hub diameter) of a Chery Fora is 56.6 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Chery Fora?

The recorded original offset is ET46. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Chery Fora?

With the same PCD (4x114.3) and the same centre bore (56.6 mm), these include: Chevrolet Epica, Chevrolet Evanda, Chevrolet Lacetti, Chevrolet Rezzo. Offset, width and rim diameter still need checking for each vehicle.

Other Chery models

Amulet 4x100 Tiggo 5x114.3 All Chery →

Does a value look wrong, or is a version missing? Let us know, we check every report.