Fiat Brava PCD

1995–2001

VERIFIED

Centre bore58.1 mm

Offset (ET)ET43

Fixing typeM12x1.25

Tightening torque86 Nm

Original tyres175/65R14

Hub centric rings 58.1 mm → Wheel spacers 4x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Fiat Brava

A Fiat Brava (1995–2001) uses a 4x98 PCD and a centre bore of 58.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x98 required. See all vehicles with 4x98.
Centre bore: the wheel must have a centre bore of 58.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.1 mm.
Offset: the original is ET43. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread M12x1.25, tightened to 86 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
Tyres: original fitment is 175/65R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x98 PCD and same 58.1 mm centre bore: wheels from these vehicles bolt on and centre on a Fiat Brava without rings. Offset, width, diameter and caliper clearance still need checking.

Fiat 500e 2013–2019 Fiat Panda III from 2012 Fiat Qubo from 2010 Fiat 500 (312) from 2007 Fiat Linea 2007–2016 Fiat Idea 2003–2016 Fiat Panda 4x4 2003–2012 Fiat Albea 2002–2012 Fiat Doblo 2001–2005 Fiat Stilo 2001–2007 Fiat Multipla 1999–2010 Fiat Palio 1998–2006 Fiat Seicento 1998–2010 Fiat Marea 1996–2001 Fiat Petra 1996–2012 Fiat Siena 1996–2012

Will wheels from another vehicle fit your Brava?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Which original wheels fit a Fiat Brava?

Wheel-by-wheel details (offset, tyres) for vehicles with the same hub:

Wheels from Fiat Panda III from 2012 Wheels from Fiat 500 (312) from 2007 Wheels from Fiat Idea 2003–2016 Wheels from Fiat Panda 4x4 2003–2012

Same PCD, different centre bore

These vehicles also use 4x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.1 mm, and will not fit if it is smaller.

Lada 112 ⌀58.5 Lada 110 ⌀58.5 Alfa Romeo 75 4 trou ⌀58.6

Frequently asked questions

What is the PCD of a Fiat Brava?

A Fiat Brava (1995–2001) has a PCD of 4x98: 4 studs or bolts spaced around a circle 98 mm in diameter.

Does a Fiat Brava need a hub centric ring?

The centre bore (hub diameter) of a Fiat Brava is 58.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Fiat Brava?

The recorded original offset is ET43. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Fiat Brava?

The specified tightening torque is 86 Nm for M12x1.25 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Fiat Brava?

With the same PCD (4x98) and the same centre bore (58.1 mm), these include: Fiat 500e, Fiat Panda III, Fiat Qubo, Fiat 500 (312). Offset, width and rim diameter still need checking for each vehicle.

Other Fiat models

Topolino 4x108 600 4x108 600E 4x108 e-Doblo 5x98 Talento 5x114.3 124 Spider 4x100 500X 5x110 500e 4x98 500L Trekking 5x98 500L 5x98 Panda III 4x98 Freemont 5x127 All Fiat →

Does a value look wrong, or is a version missing? Let us know, we check every report.