Lada 110 PCD

1995–2010

VERIFIED

Centre bore58.5 mm

Offset (ET)ET40

Fixing type-

Hub centric rings 58.5 mm → Wheel spacers 4x98(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Lada 110

A Lada 110 (1995–2010) uses a 4x98 PCD and a centre bore of 58.5 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

PCD: 4x98 required. See all vehicles with 4x98.
Centre bore: the wheel must have a centre bore of 58.5 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 58.5 mm.
Offset: the original is ET40. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
Fixings: thread -. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.

Vehicles with the same PCD and centre bore

Same 4x98 PCD and same 58.5 mm centre bore: wheels from these vehicles bolt on and centre on a Lada 110 without rings. Offset, width, diameter and caliper clearance still need checking.

Lada 112 2000–2008 Lada Samara 1984–2004

Will wheels from another vehicle fit your 110?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Make

Model

Same PCD, different centre bore

These vehicles also use 4x98 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 58.5 mm, and will not fit if it is smaller.

Lada Priora ⌀58.1 Lada Kalina ⌀58.1 Lada 1200 ⌀58.1 Abarth 500e ⌀58.1 Abarth 595 ⌀58.1 RAM RAM 700 Pickup ⌀58.1 Fiat 500e ⌀58.1 Fiat Panda III ⌀58.1

Frequently asked questions

What is the PCD of a Lada 110?

A Lada 110 (1995–2010) has a PCD of 4x98: 4 studs or bolts spaced around a circle 98 mm in diameter.

Does a Lada 110 need a hub centric ring?

The centre bore (hub diameter) of a Lada 110 is 58.5 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Lada 110?

The recorded original offset is ET40. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Lada 110?

With the same PCD (4x98) and the same centre bore (58.5 mm), these include: Lada 112, Lada Samara. Offset, width and rim diameter still need checking for each vehicle.

Other Lada models

Niva Travel 5x139.7 Priora 4x98 Kalina 4x98 112 4x98 Samara 4x98 Niva 5x139.7 1200 4x98 All Lada →

Does a value look wrong, or is a version missing? Let us know, we check every report.