FRENES

Fiat Topolino PCD

from 2023
VERIFIED
⌀65.1
PCD4x108
Centre bore65.1 mm
Offset (ET)ET34
Fixing typeM12x1.25
Original tyres155/65R14
Hub centric rings 65.1 mm → Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Fiat Topolino

A Fiat Topolino (from 2023) uses a 4x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x108 required. See all vehicles with 4x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET34. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 155/65R14. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Fiat Topolino without rings. Offset, width, diameter and caliper clearance still need checking.

Fiat 600 from 2023 Fiat 600E from 2023 Alfa Romeo Junior from 2024 Jeep Avenger from 2023 Peugeot e-208 from 2023 Opel Rocks-E from 2022 Citroen Ami from 2020 Citroen C4 III from 2020 Opel Corsa F from 2019 Peugeot 2008 II from 2019 Peugeot 208 II from 2019 DS DS 3 Crossback 2018–2021 Citroen C3 Aircross from 2017 Opel Crossland X from 2017 Citroen C3 III 2016–2024 Citroen E-Mehari 2016–2019

Will wheels from another vehicle fit your Topolino?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Fiat Topolino?

A Fiat Topolino (from 2023) has a PCD of 4x108: 4 studs or bolts spaced around a circle 108 mm in diameter.

Does a Fiat Topolino need a hub centric ring?

The centre bore (hub diameter) of a Fiat Topolino is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Fiat Topolino?

The recorded original offset is ET34. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Fiat Topolino?

With the same PCD (4x108) and the same centre bore (65.1 mm), these include: Fiat 600, Fiat 600E, Alfa Romeo Junior, Jeep Avenger. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.