FRENES

Opel Frontera II PCD

from 2024
VERIFIED
⌀65.1
PCD4x108
Centre bore65.1 mm
Offset (ET)ET28
Fixing typeM12x1.25
Original tyres215/65R16, 215/60R17
Nouvelle Frontera (2024), aussi en Frontera-e ; jantes et déport relevés sur tirewheelguide seulement.
Wheel spacers 4x108(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Opel Frontera II

A Opel Frontera II (from 2024) uses a 4x108 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 4x108 required. See all vehicles with 4x108.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET28. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread M12x1.25. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/65R16, 215/60R17. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Generations of the Opel Frontera

Previous generation: Opel Frontera (1990–2004) — same 4x108 bolt pattern and same centre bore: original wheels swap between the two generations; check offset and diameter.

Frontera 1990–2004 · 4x108 Frontera II from 2024

All recorded versions (2)

The original specs vary with the year, trim or wheel size. Identify your version from the tyre size marked on the sidewall.

VersionPCDCentre boreWheelOffsetTyre
Version 1 4x108 65.1 mm 6.5Jx16 ET28 215/65R16
Version 2 4x108 65.1 mm 6.5Jx17 ET28 215/60R17

Vehicles with the same PCD and centre bore

Same 4x108 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Opel Frontera II without rings. Offset, width, diameter and caliper clearance still need checking.

Opel Rocks-E from 2022 Opel Mokka B from 2020 Opel Corsa F from 2019 Opel Crossland X from 2017 Opel Corsa E 2014–2019 Opel Mokka 2012–2016 Opel Frontera 1990–2004 Alfa Romeo Junior from 2024 Citroen C3 Aircross II from 2024 Citroen C3 IV from 2024 Fiat 600 from 2023 Fiat 600E from 2023 Fiat Topolino from 2023 Jeep Avenger from 2023 Peugeot e-208 from 2023 Citroen C4 X from 2022

Will wheels from another vehicle fit your Frontera II?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Frequently asked questions

What is the PCD of a Opel Frontera II?

A Opel Frontera II (from 2024) has a PCD of 4x108: 4 studs or bolts spaced around a circle 108 mm in diameter.

Does a Opel Frontera II need a hub centric ring?

The centre bore (hub diameter) of a Opel Frontera II is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Opel Frontera II?

The recorded original offset is ET28 depending on the version and wheel size. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

Which vehicles have the same PCD as a Opel Frontera II?

With the same PCD (4x108) and the same centre bore (65.1 mm), these include: Opel Rocks-E, Opel Mokka B, Opel Corsa F, Opel Crossland X. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.