FRENES

Ford Tourneo PCD

from 2016
VERIFIED
⌀65.1
PCD5x160
Centre bore65.1 mm
Offset (ET)ET60
Fixing typeEcrous - 14x1.50
Tightening torque200 Nm
Original tyres215/65R16
Hub centric rings 65.1 mm → Wheel spacers 5x160(partner link) Change PCD (PCD adapter)(partner link) Sheet for your mechanic

Fitting wheels on a Ford Tourneo

A Ford Tourneo (from 2016) uses a 5x160 PCD and a centre bore of 65.1 mm. Any wheel must match the vehicle's PCD exactly: there is no tolerance, unless you use a PCD adapter.

  • PCD: 5x160 required. See all vehicles with 5x160.
  • Centre bore: the wheel must have a centre bore of 65.1 mm or more. If it is larger (as with most aftermarket wheels), add a hub centric ring wheel centre bore → 65.1 mm.
  • Offset: the original is ET60. Compare your future wheel with the offset calculator (your vehicle is already selected) to see how many millimetres further in or out it will sit.
  • Fixings: thread Ecrous - 14x1.50, tightened to 200 Nm. The nuts or bolts must have the same seat (conical, spherical or flat) as the wheel.
  • Tyres: original fitment is 215/65R16. For another size, check the diameter difference with the equivalence calculator (under 3 % recommended).

Vehicles with the same PCD and centre bore

Same 5x160 PCD and same 65.1 mm centre bore: wheels from these vehicles bolt on and centre on a Ford Tourneo without rings. Offset, width, diameter and caliper clearance still need checking.

Ford E-Transit from 2021 Ford Transit Custom 2.7t, 2.9t, 3.1t from 2013 Ford Transit Custom 3.3t from 2013 Ford Transit 2.0, 2.2 2006–2012 Ford Transit 2.3, 2.4 2001–2013 Ford Transit 1987–2000 Maxus eDeliver 7 from 2023 Maxus eDeliver 9 from 2020 Maxus EV90 from 2019 Roller Team Zefiro Ford Transit from 2019 Roller Team Kronos Ford Transit from 2018

Will wheels from another vehicle fit your Tourneo?

Choose the vehicle the wheels come from: we compare the hub, then each original wheel to the millimetre.

Same PCD, different centre bore

These vehicles also use 5x160 but with a different centre bore: their wheels need a hub centric ring if their centre bore is larger than 65.1 mm, and will not fit if it is smaller.

Volkswagen LT Single ⌀95

Frequently asked questions

What is the PCD of a Ford Tourneo?

A Ford Tourneo (from 2016) has a PCD of 5x160: 5 studs or bolts spaced around a circle 160 mm in diameter.

Does a Ford Tourneo need a hub centric ring?

The centre bore (hub diameter) of a Ford Tourneo is 65.1 mm. A wheel with a larger centre bore is fitted with a hub centric ring that brings it down to the hub diameter. A wheel with a smaller centre bore cannot be fitted.

What offset (ET) for a Ford Tourneo?

The recorded original offset is ET60. A lower ET pushes the wheel outwards, a higher ET pulls it inwards: check wheel well and caliper clearance before making any change.

What tightening torque for the wheels of a Ford Tourneo?

The specified tightening torque is 200 Nm for Ecrous - 14x1.50 fixings. Tighten in a criss-cross pattern with a torque wrench and check the tightness again after about fifty kilometres.

Which vehicles have the same PCD as a Ford Tourneo?

With the same PCD (5x160) and the same centre bore (65.1 mm), these include: Ford E-Transit, Ford Transit Custom 2.7t, 2.9t, 3.1t, Ford Transit Custom 3.3t, Ford Transit 2.0, 2.2. Offset, width and rim diameter still need checking for each vehicle.

Does a value look wrong, or is a version missing? Let us know, we check every report.